Lorem ipsum dolor

We commonly offer 3 finishes in natural stone – polished, honed and leathered (LF)

‍

We offer 3 finishes on natural stones – Polish, Hone and Leather.

• Polish – This finish is glossy, shiny and reflective in some cases like metal or mirror.
• Hone – This finish is reminiscent of a matte surface. It is smooth and soft without a shine and easy to maintain.
• Leather – This finish has texture and depth to it and adds character to a space when used correctly. This finish is also the best for slip resistance and outdoor use.

‍

The best color for your home depends on your personality, preference and the look you are trying to achieve. As a general guideline,

• light stones reflect light making a room appear bigger and brighter while dark stones absorb light making a room appear smaller and more intimate.
• However, using a dark stone or a stone with a lot of drama on 1 wall in a well-lit area or a light-colored room, will help attract focus and highlight the wall.

‍

The major difference between the two products is that ceramic/ porcelain tile is a manufactured product while natural stone tile is made from stone quarried from the earth. Ceramic/ Porcelain tiles are also easier to maintain than natural stone tiles.

Quartz is a manufactured product designed to emulate natural stone or other surfaces whereas, Quartzite is a natural stone found in the Earth’s crust. This article does a great job at comparing the 2 products.

Cosmos Quartz needs very little maintenance. Refer to our Cosmos Quartz Care and Maintenance Guide for details.

Cosmos Quartz slabs come in Jumbo (126” x 63”) and Super Jumbo (135” x75”) sizes in ¾^” and 1 ¼” thicknesses.

Cosmos Quartz can be used for any indoor application such as kitchen countertops, backsplash, bathroom vanities, shower walls, service counters, desks, flooring, etc.

This is our favorite question of all time and there are 3 reasons we’d like to focus on:

• Quality- Our product is supreme. Compare Cosmos Quartz side by side to any other brand and we are sure that you will agree. We pay the utmost care in choosing our suppliers and scrutinizing their manufacturing processes to make sure that we provide only the best to our customers.
• Service- Cosmos Quartz is distributed only through company distribution facilities covering the entire US mainland. Backed by our international parent Company, Cosmos Quartz has the luxury of matching and manufacturing just about any quartz selection and successfully completing any cut-to-size project.
• Price- After reviewing our product quality, warranty, large slab size and service level, compare Cosmos Quartz’ price to any other reputable Quartz brand and you will know that we play fair. We love to see our customers realize their dreams without breaking the bank!

‍

Yes, color variation is intended and designed into many colors to enhance the aesthetic quality. Samples are small select cuts from a slab and may not exhibit all the characteristics of a design. Cosmos highly recommends hand selecting your Cosmos Quartz slabs prior to project confirmation.

The Coefficient of Friction or COF indicates the Slip Resistance of a tile. The higher the COF the more slip resistant the tile. This is the most important factor when selecting a floor tile for areas that get wet, such as your shower or bathroom floor.

• For residential applications, a COF Rating higher than 0.50 is recommended
• For commercial applications, a COF Rating higher than 0.60 is recommended and required to meet ADA compliance

The COF rating is usually listed on the carton of each tile product, on the product page or on the product tear sheet. You can find the tear sheet for your product in the resources section.

‍

The Porcelain Enamel Institute or PEI wear rating indicates the ceramic tile’s abrasion resistance or the overall durability of the tile against foot traffic. The rating scales goes from 1-5 and these 5 classes are explained below:

• PEI 1: Lowest abrasion resistance. No foot traffic, wall applications only.
• PEI 2: Low abrasion resistance. Light foot traffic like residential bathroom floors or wall applications.
• PEI 3: Moderate abrasion resistance. Light to moderate foot traffic in residential applications like kitchens, bathrooms, dining rooms, family rooms and foyers.
• PEI 4: High abrasion resistance. Moderate to heavy foot traffic applications like residential, medium commercial and light industrial floor and wall applications including shopping malls, offices, restaurant dining rooms, showrooms and hallways.
• PEI 5: Very high abrasion resistance. These tiles can be used anywhere including airports, subways and grocery stores.

The PEI rating is usually listed on the carton of each tile product, on the product page or on the product tear sheet and is especially important in determining a product’s usability in a project. You can find the tear sheet for your product in the resources section.

‍

The major difference between the two products is that a ceramic/ porcelain tile is a manufactured product while natural stone tile is made from natural stone quarried from the earth. Ceramic/ Porcelain tiles are also easier to maintain than natural stone tiles.

• The major difference between the two types of tiles is in their ability to hide/ cover wear over time.
• In Glazed tiles, the glaze is baked into the top surface of the clay where the color of the glaze is usually different from the color of the clay. Due to this color difference, any chips or breakages to the top of the tile will stand out.
• Through body tiles on the other hand, do not have a glaze and the same color runs through the body of the tile making it more resilient to wear over time.

‍

The major difference between Ceramic tiles and Porcelain tiles is in the way they are manufactured. Porcelain tiles are fired at temperatures higher than 1200 degrees Celsius resulting in a product that is superior in properties like chip and break resistance, stain resistance, and extremely low water absorption (less than 0.5%). Due to these enhanced properties, porcelain tiles and slabs can be used in showers, swimming pools, building facades and more.